Drop-down Combo Box - index number of selected item

[Walls]

Hi All,

Is there a way for winbatch to return position or index number of the selected item in the Drop-down Combo Box?

In my example script below, I have Tom listed twice in the varible StrDropList. When I select the second instance of Tom, I get the index position of the first instance of the name Tom using ItemLocate (I assume this is expected behavior). I need the selected name position, not the first one it comes to that matches the string.

Thanks!

Code: [Select]

GoSub LoadConstants
dlVariable1 =""

InitDialogConstants()                                       ; Initialize Dialog Constants (need only be done once usually)

#DefineSubroutine MyDialogCallbackProc(MyDialog_Handle,MyDialog_Message,MyDialog_Name,MyDialog_EventInfo,MyDialog_ChangeInfo)
   ON_EQUAL = @TRUE                                         ; Initialize variable ON_EQUAL
   switch MyDialog_Message                                  ; Switch based on Dialog Message type
      case MSG_INIT                                         ; Standard Initialization message
         DialogProcOptions(MyDialog_Handle,MSG_TIMER,1000)
         DialogProcOptions(MyDialog_Handle,MSG_BUTTONPUSHED,@TRUE)
         DialogProcOptions(MyDialog_Handle,MSG_COMBOCHANGE,@TRUE)
         StrDropList=StrCat("Tom",@Tab,"Bob",@Tab,"Tom",@Tab,"Ray")
         DialogControlSet( MyDialog_Handle,"DropListBox_1", DC_ITEMBOXCONTENTS, StrDropList)
         return(RET_DO_DEFAULT)

     case MSG_BUTTONPUSHED
        if MyDialog_Name == "PushButton_OK"                ; OK
              return(RET_DO_DEFAULT)

        elseif MyDialog_Name == "PushButton_Cancel"        ; Cancel
              return(RET_DO_DEFAULT)

        endif                                              ; MyDialog_Name
        return(RET_DO_DEFAULT)

     case MSG_COMBOCHANGE                                  ; ID "DropListBox_1"  dlVariable1
              selectedname = DialogControlGet(MyDialog_Handle, "DropListBox_1", DC_ITEMBOXSELECT)
              ;selectedsitenameIdx = DialogControlGet(MyDialog_Handle, "DropListBox_1", DC_POSITION)
              selectednameIdx = itemLocate (selectedname, StrDropList, @Tab)
              Message("",StrCat(selectedname," is in StrDropList Position: ",selectednameIdx))

        return(RET_DO_DEFAULT)

   endswitch                                                ; MyDialog_Message
   return(RET_DO_DEFAULT)
#EndSubroutine                                              ; End of Dialog Callback MyDialogCallbackProc

;============================================================
;============================================================
;============================================================

MyDialogFormat=`WWWDLGED,6.2`

MyDialogCaption=`WIL Dialog 1`
MyDialogX=116
MyDialogY=090
MyDialogWidth=130
MyDialogHeight=104
MyDialogNumControls=003
MyDialogProcedure=`MyDialogCallbackProc`
MyDialogFont=`DEFAULT`
MyDialogTextColor=`DEFAULT`
MyDialogBackground=`DEFAULT,DEFAULT`
MyDialogConfig=0

MyDialog001=`071,071,036,012,PUSHBUTTON,"PushButton_OK",DEFAULT,"OK",1,10,32,DEFAULT,DEFAULT,DEFAULT`
MyDialog002=`017,071,036,012,PUSHBUTTON,"PushButton_Cancel",DEFAULT,"Cancel",0,20,DEFAULT,DEFAULT,DEFAULT,DEFAULT`
MyDialog003=`023,019,072,040,DROPLISTBOX,"DropListBox_1",dlVariable1,DEFAULT,DEFAULT,30,DEFAULT,DEFAULT,DEFAULT,DEFAULT`

ButtonPushed=Dialog("MyDialog")


;============================================================
Exit
;============================================================


:LoadConstants
;============================================================
#DefineSubRoutine InitDialogConstants()
   ;DialogprocOptions Constants
   MSG_INIT=0                    ; The one-time initialization
   MSG_TIMER=1                   ; Timer event
   MSG_BUTTONPUSHED=2            ; Pushbutton or Picturebutton
   MSG_RADIOPUSHED=3             ; Radiobutton clicked
   MSG_CHECKBOX=4                ; Checkbox clicked
   MSG_EDITBOX=5                 ; Editbox or Multilinebox
   MSG_FILESELECT=6              ; Filelistbox
   MSG_ITEMSELECT=7              ; Itembox
   MSG_COMBOCHANGE=8             ; Combobox/Droplistbox
   MSG_CALENDAR=9                ; Calendar date change
   MSG_SPINNER=10                ; Spinner number change
   MSG_CLOSEVIA49=11             ; Close clicked (Enabled via DialogProcOptions 1002
   MSG_FILEBOXDOUBLECLICK=12     ; Get double-click message on a FileListBox
   MSG_ITEMBOXDOUBLECLICK=13     ; Get double-click message on an ItemBox
   MSG_COMEVENT=14               ; COMCONTROL Event notification from DialogObject (NOT DialogProcOptions)
   MSG_MENUITEM=15               ; MenuItem selected
   MSG_MENUITEMINIT=16           ; MenuItem initialized
   MSG_RESIZE=17                 ; Dialog resized
   MSG_RVITEMSELROW=18           ; Reportview item select row
   MSG_RVDBLCLICKROW=19          ; Reportview double-click row
   MSG_RVCHECKEDITEM=20          ; Reportview checked/unchecked Item
   MSG_RVITEMTEXT=21             ; Reportview changed text of first column
   MSG_RVHEADER=22               ; Reportview header clicked

   DPO_DISABLESTATE=1000         ; codes -1=GetSetting 0=EnableDialog 1=DisableDialog
   DPO_CHANGEBACKGROUND=1001     ; -1=Get Current otherise bitmap or color string
   DPO_CHANGESYSMENU=1002        ; -1=Get Current 0=none 1=close 2=close/min 3=close/max 4=close/min/max
   DPO_CHANGETITLE=1003          ; Set/Get Dialog Title - (-1 to get)
   DPO_GETNAME=1004              ; Returns the name associated with a control's number.
   DPO_GETNUMBER=1005            ; Returns the number associated with a control's name.
   DPO_GETCLIENTAREA=1007        ; Returns a space delimited list of the width and height of the client area.

   ;DialogControlState Constants
   DCSTATE_SETFOCUS=1            ; Give Control Focus
   DCSTATE_QUERYSTYLE=2          ; Query control's style
   DCSTATE_ADDSTYLE=3            ; Add control style
   DCSTATE_REMOVESTYLE=4         ; Remove control style
   DCSTATE_GETFOCUS=5            ; Get control that has focus
   DCSTATE_MOVEMOUSEOVER=6       ; Move the mouse over the control

   DCSTYLE_DEFAULT=0             ; Set Default Style
   DCSTYLE_INVISIBLE=1           ; Set Control Invisible
   DCSTYLE_DISABLED=2            ; Set Control Disabled
   DCSTYLE_NOUSERDATA=4          ; Note: Setable via DialogControlState function ONLY SPINNER control only
   DCSTYLE_READONLY=8            ; Sets control to read-only (user cannot type in data) EDITBOX MULTILINEBOX SPINNER
   DCSTYLE_PASSWORD=16           ; Sets 'password mode' where only *'s are displayed EDITBOX
   DCSTYLE_DEFAULTBUTTON=32      ; Sets a button as the default button PUSHBUTTON PICTUREBUTTON
   DCSTYLE_DIGITSONLY=64         ; Set edit box to accept digits only EDITMOX MULTILINEBOX
   DCSTYLE_FLAT=128              ; Makes a 'flat' hyperlink-looking button PUSHBUTTON PICTUREBUTTON
   DCSTYLE_NOADJUST=256          ; Turns off auto-height adjustment  ITEMBOX FILELISTBOX
   DCSTYLE_TEXTCENTER=512        ; Center text in control VARYTEXT STATICTEXT
   DCSTYLE_TEXTRIGHT=1024        ; Flush-Right text in control VARYTEXT STATICTEXT
   DCSTYLE_NOSELCURLEFT=2048     ; No selection, cursor left EDITBOX MULTILINEBOX
   DCSTYLE_NOSELCURRIGHT=4096    ; No selection, cursor right EDITBOX MULTILINEBOX
   DCSTYLE_SHIELD=8192           ; Display Security Shield icon on button (Vista only) PUSHBUTTON PICTUREBUTTON
   DCSTYLE_MENUCHECK=32768       ; Adds a check mark to the left of a menu item MENUITEM
   DCSTYLE_MENURADIO=65536       ; Adds a radio button like dot graphic to the left of a menu item MENUITEM
   DCSTYLE_MENUSEP=131072        ; Separator bar graphic MENUITEM
   DCSTYLE_MENUBREAK=262144      ; Column break MENUBAR
   DCSTYLE_NOHEADER=524288       ; No header bar REPORTVIEW
   DCSTYLE_COLHEADER=1048576     ; First row column header REPORTVIEW
   DCSTYLE_GRIDLINES=2097152     ; Grid lines REPORTVIEW
   DCSTYLE_SELONEROW=4194304     ; Only one row can be selected at a time REPORTVIEW
   DCSTYLE_SELALLROW = 8388608   ; Highlight complete row REPORTVIEW
   DCSTYLE_SORTASC=16777216      ; Ascending sort REPORTVIEW
   DCSTYLE_SORTDESC=33554432     ; Descending sort REPORTVIEW
   DCSTYLE_EDITCOL=67108864      ; Edit first columns text REPORTVIEW
   DCSTYLE_COLCHECKBOX=134217728 ; Add checkbox to first column REPORTVIEW
   DCSTYLE_INSHEADER=268435456   ; Include column header text REPORTVIEW

   ;DialogControlSet / DialogControlGet Constants
   DC_CHECKBOX=1             ; CHECKBOX REPORTVIEW
   DC_RADIOBUTTON=2          ; RADIOBUTTON
   DC_EDITBOX=3              ; EDITBOX MULTILINEBOX
   DC_TITLE=4                ; PICTURE RADIOBUTTON CHECKBOX PICTUREBUTTON VARYTEXT STATICTEXT GROUPBOX PUSHBUTTON MENUITEM
   DC_ITEMBOXCONTENTS=5      ; ITEMBOX FILELISTBOX DROPLISTBOX REPORTVIEW
   DC_ITEMBOXSELECT=6        ; ITEMBOX FILELISTBOX DROPLISTBOX REPORTVIEW
   DC_CALENDAR=7             ; CALENDAR
   DC_SPINNER=8              ; SPINNER
   DC_MULTITABSTOPS=9        ; MULTILINEBOX
   DC_ITEMSCROLLPOS=10       ; ITEMBOX FILELISTBOX
   DC_BACKGROUNDCOLOR=11     ; RADIOBUTTON CHECKBOX VARYTEXT STATICTEXT GROUPBOX PUSHBUTTON ITEMBOX FILELISTBOX DROPLISTBOX SPINNER EDITBOX MULTILINEBOX REPORTVIEW
   DC_PICTUREBITMAP=12       ; PICTURE PICTUREBUTTON
   DC_TEXTCOLOR=13           ; RADIOBUTTON CHECKBOX VARYTEXT STATICTEXT GROUPBOX PUSHBUTTON ITEMBOX FILELISTBOX DROPLISTBOX SPINNER EDITBOX MULTILINEBOX REPORTVIEW
   DC_ITEMBOXADD=14          ; ITEMBOX FILELISTBOX DROPLISTBOX REPORTVIEW
   DC_ITEMBOXREMOVE=15       ; ITEMBOX FILELISTBOX DROPLISTBOX REPORTVIEW
   DC_RADIOVALUE=16          ; RADIOBUTTON
   DC_POSITION=17            ; ALL CONTROLS (Except MENUBAR and MENUITEM)
   DC_MENUNAMES=18           ; ALL CONTROLS
   DC_HANDLE=19              ; ALL CONTROLS (Except MENUBAR and MENUITEM)
   DC_RVCOLHEAD=20           ; REPORTVIEW
   DC_RVCOLWIDTH=21          ; REPORTVIEW
   DC_RVADDCOL=22            ; REPORTVIEW
   DC_RVREMOVECOL=23         ; REPORTVIEW
   DC_RVMATCHCOL=24          ; REPORTVIEW
   DC_RVCANCELEDIT=25        ; REPORTVIEW
   DC_RVCHECKEDROWS=26       ; REPORTVIEW
   DC_RVJUSTIFY=27           ; REPORTVIEW


   ;DialogObject constants
   DLGOBJECT_ADDEVENT=1      ; Call dialog callback when the specified event occurs
   DLGOBJECT_STOPEVENT=2     ; Stop calling dialog callback when an event previously requested with
   DLGOBJECT_GETOBJECT=3     ; Return an object references to the specified control
   DLGOBJECT_GETPICTURE=4    ; Create and return an object reference to a picture object

   ;Return code constants
   RET_DO_CANCEL=0           ; Cancels dialog
   RET_DO_DEFAULT= -1        ; Continue with default processing for control
   RET_DO_NOT_EXIT= -2       ; Do not exit the dialog
   return
#EndSubroutine
;============================================================
Return



 

[Walls]

Sorry, I am not following your response or I may not be asking the question the best way.

Is there a DialogControlGet that returns the selected Item from the Drop-down Combo Box? Using "ItemLocate" is similer to what I am trying to accomplish. Using the example I submitted in the other post, If I have the same name twice in the drop down, and select the second one, I need its position in the list returned. 

[td]

In my ongoing effort to completely confuse all WinBatch users, I replaced the previous response with this one.

You need to specify the @csListOnly style for your Combo control unless you don't want a potential user to enter something that has no index.  Then you need to make each entry unique which is a fairly trivial task.  Just prepend or append a number to each entry.  For example,

Code: Winbatch

; Given this control contents
"1) Tom":@Tab:"2) Bob":@Tab:"3) Tom":@Tab:"4) Ray"
;do this in your event.
strSelected = DialogControlGet(ComBo_Handle, "DropListBox_1",@dcSelect)
Index = ItemExtract(1, strSelected, ')')

which embeds and extracts the index in the text.

Or you could consider using a different dialog control. 

[JTaylor]

One option is a CommControl Extender I wrote.  I think it will do what you are wanting.   Here is a link.

   http://www.jtdata.com/anonymous/CommControl.zip


Jim

[Walls]

Thanks TD! This is much more clear. Also, thanks JTaylor as well for the offer of the additional extender. 

[td]

Jim's post reminded me that you could also just use the following in your event case to get the zero-based index of the selected item:

Code: Winbatch

         CB_GETCURSEL = 327
         hWnd = DialogControlGet(Combo_Handle, "DropListBox_1",@dchWnd)
         Index = DllCall('user32.dll', long:'SendMessageW', long:hWnd, long:CB_GETCURSEL, long:0, long:0)
 

Note that "Combo_Handle" is the dialog's window handle and not the "DropListBox" window handle.